|
Directions
1. Open heating pad and shake to activate.
2. Insert bladder
bag into custom pocket on belt.
3. Make sure clips are fastened securely to avoid leaking.
4. Run tubing through
hole in pocket.
5. Place heating pad behind bladder bag.
6. Wrap Field Kit around waist with bladder bag touching
your skin with
tube pointing down.
7. Wear belt for 1 hour before use.
8. Temperature
strip must be registering between 90-100 degrees before
use.
9. Close clips and cut tubing
to desired length.
10. At time of use, unfasten clips and drain fluid.
|
